Lowriderbike.com
Gallery
Give your engine added detail with a few simple modifications.
< previous photo 
Photo 15 of 20
next photo >
03Lrmsum Distributor13z
Step 13.When dry, carefully push the black insulation pieces down to the cap, making sure that they all sit on the cap. After you make them flat with the cap, add a dab of glue to the boots and spread evenly to hold the boots together. Do not let the glue get on the wires. If it does, you will not be able to separate the plugs and it will be a mess! Glue the distributor stem to the already drilled hole on the engine block. At this point, you should have a cool engine block with a polished distributor and colored wires with black boots on the ends sticking out like an alien having a bad hair day.
03Lrmsum Distributor12z 03Lrmsum Distributor14z 03Lrmsum Distributor19z 03Lrmsum Distributor15z 03Lrmsum Distributor16z 03Lrmsum Distributor17z
Trade In Value